_______________________________________________
|
Precision Billet Rear Derailleur Upgrade Parts, Proshift and Bombshell
|
All Titanium fasteners and bolts are Grade 5 / 6al-4v
|
The Derailleur below was produced here at TorontoCycles. I have all parts
and might release a complete production model in the near future.
Complete weight of unit below = 153g.
The weight will drop to 149g with the lighter 10t pulleys installed.
All parts on this are Aluminum hardware or Titanium hardware
|
Precision Billet Rear Derailleur Pivot Bolt
|
A replacement Pivot bolt for vintage
Precision Billet rear derailleurs. The
snap ring will be posted separately.
|
Precision Billet Titanium Return Spring
|
This is for a replacement titanium
return spring for most precision billet
rear derailleurs. Includes ti bushing
as shown on the photo
1.7 grams.
|
Precision Billet Titanium Body Pins
|
This is for a replacement titanium Body Pin
for most precision billet rear derailleurs.
Includes ti snap ring.
1 gram each
|
Precision Billet Titanium Housing - Cage Spring
|
This is for a replacement titanium
housing spring for most precision billet
rear derailleurs. The photo on the left is
the Cage spring.
3.5 gram each
|
The photo on the left shows the 2 different
types of springs most of these derailleurs use.
The spring on the left is the original spring
and is the CAGE spring.
The spring on the right is the titanium version
of the BODY spring.
|
Please note: These springs have a bit longer ends, you may need
to file the ends down a bit to fit.
|
Precision Billet Short Cage Replacement Plate
|
$12.00
Precision Billet replacement cage plate. Fits
all vintage derailleurs. Distance between
wheel mounting holes is 67mm.
|
If you require this item in other
anodized aluminum colors please send
me an email. I will see if I can make.
|
This is for a set of anodized jockey
wheels. These have sealed bearings
and come with spacers/bushings
posted below. These pulleys work
on all Shimano and all related
systems. 10 tooth, 28 grams for all
in photo
|
10T Anodized Derailleur Jockey Pulleys Slotted
|
$14.00
This is for a set of anodized jockey wheels. These have over sized
sealed bearings. These pulleys work on all Shimano and all related
vintage systems.
10 tooth, 14.5 grams for a set.
|
10T Derailleur Jockey Pulleys - Oversized Bearings
|
$12.00
Please note that a tracking
number is extra cost and is
very expensive overseas.
Some orders take extra time
so please be patient if a delay
occurs.
|
Paypal, Credit Cards and Checks Accepted
|
Orders ship for 5.00 via Air Mail
Add Tracking to your
Order:
Canada = 8.00
USA = 12.00
International = 40.00
|
This is for a replacement
Aluminum cable adjuster for
most precision billet and
many cnc type brake levers.
Uses M7 Threads.
4.5 Grams
|
Precision Billet Aluminum Cable Adjuster - M7
|
M7 Precision Billet Titanium Cable Adjuster
|
This is for a replacement titanium
cable adjuster for most precision
billet and many cnc type brake levers.
Uses M7 Threads. 7.5 grams.
|
M6 Titanium Brake/Cable Adjuster
|
This is for a replacement titanium
cable adjuster for many cnc type brake
levers.
Uses M6 Threads. 7 grams.
|
