| Titanium Derailleur Jockey Wheel Bolt Pair |
| $5.50 |
| These fit all Shimano and any derailleur using countersunk bolts. |
| Titanium Rear Derailleur Pivot Bolt Shimano |
| $10.00 |
| Will fit all Shimano: XT, XTR, Dura Ace. |
| Titanium Derailleur Pinch Bolt m5x8.5 |
| This is for a pack of 6 Derailleur cable housing caps. 4mm ID. moulded plastic |
| 6 Derailleur Cable Housing Ferrules |
| This is for a pack of 6 Brake cable housing caps. 5mm Housings |
| 6 Brake Cable Housing Ferrules |
| This is for a Mini alloy aluminum bolt kit. These bolts replace your little steel bolts on your derailleur and brakes. you get: 2 m4x16mm, 4 m3x10mm, 4 m3x15mm and 4 m3x20mm. m4 pitch=.7, m3 pitch=.5 This is a universal kit, you get more than you need for the average bike. 6 grams for the set |
| Derailleur/Brake Spring/Stop Mini Alloy 14 Bolts |
| Blue Mini Kit |
| Purple Mini Kit |
| Silver (Raw) Mini Kit |
| $2.50 |
| This is for a set of anodized jockey wheels. These have over sized sealed bearings. These pulleys work on all Shimano and all related vintage systems. 10 tooth, 14.5 grams for a set. |
| 10T Derailleur Jockey Pulleys - Oversized Bearings |
$12.00
| Red Pulleys |
| Blue Pulleys |
| Gold Pulleys |
| Black Pulleys |
| Made from T6 7075 aluminum Mounts the rear derailleur to the droupout Fits all Shimano type rear derailleurs. These do not fit the new Shadow derailleurs These are the same as SRP once produced 6 grams |
| Anodized Black |
| Aluminum Derailleur Jockey Wheel Bolt Pair |
| These fit all Shimano and any derailleur using countersunk bolts. M5 Bolt. 1.6 grams for the pair |
| Anodized Blue |
| Raw Aluminum |
| Anodized Gold |
| $4.00 |
| KCNC Derailleur Aluminum Jockey Wheel Bolt Pair. 1 gram for the pair |
| KCNC Derailleur Jockey Wheel Bolt Pair |
| $8.00 |
| KCNC Silver |
| KCNC Red |
| KCNC Green |
| KCNC Black |
| This is for an aluminium alloy derailleur adjustment bolt. This has m5x12 threads and will fit all Shimano related systems. Thread Pitch = 0.8 1.6 grams each |
| Aluminium Alloy Derailleur Adjustment Bolt Shimano Systems |
| Anodized Red |
| Anodized Black |
| $4.50 |
| Anodized Silver |
| Anodized Blue |
| Anodized Gold |
| Aerozine 11T Derailleur Jockey Wheel Set - Super Light - 11.6g Pair |
$35.00
| Aerozine Anodized aluminum jockey wheels. For use with all Shimano type systems. These have sealed ball bearings. 11.6 grams for the set! Please note: Side caps are all black. This sale is for a pair of pulleys. |
| Green Aerozine Pulleys |
| Gold Aerozine Pulleys |
| $7.00 |
| AEST 11T 7075 Anodized Derailleur Jockey Wheel Set - Ceramic Bearings |
$48.00
| AEST 7075 Anodized aluminum jockey wheels. For use with all Shimano type systems. These have ceramic bearings and spin totally freely. 19 grams for the set Please note: Side caps colors are posted above. These bearings are not shielded. |
| Blue - Gold Caps |
| Black- Gold Caps |
| Gold- Red Caps |
| Red- Black Caps |
| Titanium Shimano Derailleur Adjustment Bolt Stock Version |
| This is for a titanium derailleur adjustment bolt. This has m5 threads and will fit Shimano related systems. these are for use with derailleur cable only. |
| AEST 11T 7075 Anodized Derailleur Jockey Wheel Set - Oversized Bearings |
$13.00
| 4 Slot Gold |
| 4 Slot Red |
| 4 Slot Black |
| 10T Anodized Derailleur Jockey Pulleys Slotted |
$14.50
| AEST 11T Ultra Light Derailleur Jockey Wheel Set Ceramic Bearings |
$35.00
| 11T Anodized Derailleur Jockey Wheels Oversized Bearings |
| AEST 7075 Anodized aluminum jockey wheels. For use with all Shimano type systems. These have ceramic bearings and spin totally freely. 18.5 grams for the set These bearings are not shielded. |
$12.00
| Black- Red Caps |
| Red Pulleys |
| Red- Black Caps |
| Black Pulleys |
| Green Pulleys |
| Red Caps |
| Black Caps |
| Change Colors To Side Caps |
| Gold Caps |
| Silver Pulleys |
| Gold Pulleys |
| Anodized aluminum jockey wheels. 11t version as a direct replacement for all Shimano type systems. These have oversized sealed ball bearing for crisper shifting. Bearing size = 9mm ID -17mm OD - 5mm thick 20 grams for the set Please note: On color Red will come with red caps - Black will come with gold or black caps. Green, Gold, Blue and silver come with the same color caps. Gold pulleys are a bit deeper and purple are a bit lighter in color. Below is a link that you can add to cart cap color change for no extra charge. |
| Hollow Black Titanium Rear Derailleur Jockey Wheel Bolt Pair |
| These fit all Shimano and any derailleur using countersunk bolts. Drilled thru in the center. M5 Bolt. 2 grams for the pair |
| $7.00 |
| Titanium Derailleur Hanger Nut and Bolt |
$3.50
| This is for the bracket that mounts to the frame. |
| Aluminum Derailleur Pivot Bolt - Campy Centaur |
$9.00
| Replaces the Rear pivot bolt on Campy Centaur type derailleurs. This bolt can vary from derailleur to derailleur. On the photo to the lower left is a unit I installed the full kit on. On this model the bolt was a bit short to the snap ring so I removed the metal washer (photo is also to the left) for extra clearance. The bolt might require you to modify in order to work once mounted. 5g. Snapring is not included. |
| Silver Campy Pivot |
| Sram Aluminum Derailleur Jockey Wheel Bolt Pair |
$4.00
| Silver Bolts |
| Aluminum Jockey Wheel Bolt pair for Sram Derailleurs. These are for the X.0 type systems and basically for higher end units using aluminum cages. If your not sure please pull a bolt to see if it visually compares to the photo. M4 threads. |
| Colored Brake Cable and Housing End Caps |
| 10 Gold End Caps |
| 10 Purple End Caps |
| 10 Green End Caps |
| 10 Black End Caps |
$1.00
| 10 Blue End Caps |
| 10 Red End Caps |
| This is for a pack of 10 Brake cable end caps. These are crimped over the cable end to prevent cable fraying. |
| This is for a SINGLE aluminum anodized jockey wheel. 12t version as a direct replacement for some older (Vintage) systems and can also be used with most Shimano for crisper shifting. These have oversized sealed ball bearings and are a bit larger OD than the 11t version. Bearing size = 9mm ID -17mm OD - 5mm thick 10 grams each Please note: This item is not sold in pair form. Below is a link that you can add to cart cap color change for no extra charge. If no color is chosed Gold side caps will be installed. |
| Red Pulley |
| Red Caps |
| Black Caps |
| Change Colors To Side Caps |
| Gold Caps |
| Silver Pulley |
| 12T Anodized Derailleur Jockey Wheel (Oversized) Oversized Bearings |
| Red Campy Pivot |
| This is for an aluminium alloy derailleur adjustment bolt. This has m5 threads and will fit all Campy related systems. These are for use with derailleur cable only. 1.6 grams each m5 threads - 0.5 pitch Very fine threads. |
| Anodized Silver |
| Anodized Red |
| Aluminium Alloy Derailleur Adjustment Bolt Campagnolo Systems |
| $4.50 |
| M5x8.5 Purple Aluminum Bolt |
| M5x8.5 Gold Aluminum Bolt |
| M5x8.5 Blue Aluminum Bolt |
| M5x8.5 Black Aluminum Bolt |
| M5x8.5 Silver Aluminum Bolt |
| M5x8.5 Pink Aluminum Bolt |
| M5x8.5 Red Aluminum Bolt |
| Titanium Derailleur Jockey Wheel Bolt Pair - EXTRA LONG |
| $5.50 |
| For Shimano and any derailleur using countersunk bolts. The bolts are 2mm longer than stock bolts to allow extra room for wider chains. 16.4mm total length. |
| Colored Derailleur Cable and Housing End Caps |
$1.00
| 10 Black End Caps |
| This is for a pack of 10 Derailleur cable end caps. These are crimped over the cable end to prevent cable fraying. |
| 10 Silver End Caps |
| This is for an aluminium alloy brake adjustment bolt. It is used an many systems. This has standard m5 threads. Thread Pitch = 0.8, 17.5mm Threaded 1.9 grams each |
| M5 Aluminum Alloy Brake Adjustment Bolt Extra Long Derailleur Cable Adjuster |
| Anodized Red |
| Anodized Black |
| Anodized Pink |
| Anodized Purple |
| $5.80 |
| Anodized Silver |
| Anodized Blue |
| Anodized Gold |
| Anodized Gold |
| Anodized Blue |
| Anodized Purple |
| Anodized Purple |
| Black Campy Pivot |
| Black Pulley |
| Gold Pulley |
| Blue Pulley |
| This is for a set aluminum anodized jockey wheel. 11t solid version as a direct replacement for some older (Vintage) systems and can also be used with all Campy and Shimano. These have oversized sealed ball bearings and are a bit larger OD than the 11t version. Bearing size = 9mm ID -17mm OD - 5mm thick These have plastic spacers instead of the standard CNC type side caps. These allow a wide variety of hard to fit applications to work. Great for older systems that use larger 6mm bolts. |
$14.00
| Red 11t Solid Wheels |
| 11T Solid Billet Anodized Derailleur Jockey Wheels Oversized Bearings - Universal Fit |
| Blue 11t Solid Wheels |
| Green 11t Solid Wheels |
| Gold 11t Solid Wheels |
| Silver 11t Solid Wheels |
| Black 11t Solid Wheels |
| Purple 11t Solid Wheels |
| Titanium Shimano Derailleur Adjustment Bolt |
| $6.00 |
| This is for a titanium derailleur adjustment bolt. This has m5 threads and will fit Shimano related systems. these are for use with derailleur cable only. |
| Black Titanium Hollow Rear Derailleur Pivot Bolt Kit |
| $28.00 |
| Will fit Shimano except Shadow. Kit includes: Hollow pivot bolt, Jockey wheel bolts, m5x8.5, Cable adjuster and m4x12 mini stop bolt 12.5 grams |
| $2.70 |
| Natural M4x17 |
| $2.80 |
| Black M4x12 |
| Solid Aluminum Rear Derailleur Pivot Bolt |
$7.00
| Silver Pivot Bolt |
| Blue Pivot Bolt |
| Black Pivot Bolt |
| Red Pivot Bolt |
| Gold Pivot Bolt |
| Aluminum Hollow Rear Derailleur Pivot Bolt: Shimano - 3.5grams |
| Made for Dura-Ace but will fit all Shimano: XT, XTR. Uses a 5mm allen wrench. 3.5 grams |
| Anodized Blue |
| Raw Aluminum |
| $8.50 |
| Anodized Gold |
| Anodized Red |
| Anodized Black |
| Anodized Green |
| Anodized Purple |
| AEST 11T 7075 Anodized Derailleur Jockey Wheels - Oversized Bearings |
$13.00
| AEST 7075 Anodized aluminum jockey wheels. For use with all Shimano type systems. These have oversized sealed ball bearing for crisper shifting. Bearing size = 9mm ID -17mm OD - 5mm thick 18 grams for the set Please note: Side caps are matching color as in the photo. These bearings are steel shielded This sale is for the 3 slot version as shown in the photo below. |
| 3 Slot Black |
| Titanium Hollow Rear Derailleur Pivot Bolt Kit |
| $25.00 |
| Will fit Shimano except Shadow. Kit includes: Hollow pivot bolt, Jockey wheel bolts, m5x8.5, Cable adjuster and m4x12 mini stop bolt 12.5 grams |
| Titanium jockey wheels. 11t version as a direct replacement for all Shimano type systems. These have oversized sealed ball bearing for crisper shifting. Bearing size = 9mm ID -17mm OD - 5mm thick 26 grams for the set |
| 11T Titanium Derailleur Jockey Wheel Set Oversized Bearings |
$36.00
| Titanium Pulleys |
| AEST 11T 7075 Anodized Derailleur Jockey Wheels - Oversized Bearings |
$13.00
| AEST 7075 Anodized aluminum jockey wheels. For use with all Shimano type systems. These have oversized sealed ball bearing for crisper shifting. Bearing size = 9mm ID -17mm OD - 5mm thick 19 grams for the set Please note: Side caps are matching color as in the photo. These bearings are steel shielded This sale is for the 5 slot version as shown in the photo. |
| 5 Slot Red |
| Black Titanium Hollow Rear Derailleur Pivot Bolt - Shimano |
| $13.50 |
| Will fit all Shimano: XT, XTR, Dura Ace Uses a 5mm allen wrench. This is a standard bolt size used by Shimano Does not fit the XTR Shadow or Sram 6 grams. |
| KCNC 11T Derailleur Jockey Wheels |
$30.00
| KCNC 11t Derailleur Wheel Set - 7075 anodized alloy Compatible with Shimano/Sram Steel ball bearings Weight = 18gr/pair Price is for a pair |
| KCNC 11t Gold |
| KCNC 11t Silver |
| KCNC 11t Green |
| KCNC 10T Derailleur Jockey Wheels |
$30.00
| KCNC 10t Derailleur Wheel Set - 7075 anodized alloy Compatible with Shimano/Sram Steel ball bearings Weight = 17gr/pair Price is for a pair |
| KCNC 10t Red |
| KCNC 10t Blue |
| KCNC 10t Gold |
| KCNC 10t Silver |
| Derailleur Jockey Wheel Bushing Kit |
$3.00
| Bushing Kit |
| The Bushing kit is used on the above derailleur pulleys. Use of the brass bushings will allow the pulleys to "float" and use of the small stainless washers will fix pulleys solid. This will NOT work with the pulleys with OVERSIZED bearings. |
| This is for a set of anodized jockey wheels. These have sealed bearings and come with spacers/bushings posted below. These pulleys work on all Shimano and all related systems. 10 tooth, 28 grams for all in photo |
| Gold Pulleys |
| Blue Pulleys |
| Green Pulleys |
| Black Pulleys |
| Purple Pulleys |
$7.50 Each
| Titanium Hollow Rear Derailleur Pivot Bolt Shimano |
| $13.50 |
| Made for Dura-Ace but will fit all Shimano: XT, XTR. Uses a 5mm allen wrench. Does not fit the XTR Shadow |
| $2.50 |
| Titanium Derailleur/Spring Tensioners 4mm Narrow Head |
| These are used for the spring tension loaders and high/low adjusters on most derailleurs. Fits all Shimano Selections are for Raw titanium and Black Titanium |
| Natural M4x12 |
| Aluminum Alloy Derailleur Jockey Wheel Bolts Shimano Shadow |
$4.50
| Aluminum Jockey Wheel Bolts for Shimano Shadow Derailleurs. Has one standard bolt and one aluminum bolt made just for Shadow. The Shadow bolt has the small extention for the snap ring holding the cage. |
| Red Shadow Wheel Bolts |
| Black Shadow Wheel Bolts |
| Silver Shadow Wheel Bolts |
| M5 Aluminum Derailleur Pinch Bolt |
| $1.50 |
| Aluminum Anodized derailleur pinch bolt. These are used on all Shimano. Non Taper Head 1 gram |
| Black Titanium Derailleur Adjustment Bolt |
| $6.00 |
| This has m5 threads and will fit all Shimano related systems. these are for use with derailleur and brake cables. |
| This is for a pack of 10 Brake Or Derailleur cable end caps. These are crimped over the cable end to prevent cable fraying. |
| Cable and Housing End Caps |
$1.00
| 10 Brake Cable End Caps |
| 10 Derailleur Cable End Caps |
| Sram Aluminum Rear Derailleur Pivot Bolt |
$9.00
| Made from T6 7075 aluminum Mounts the rear derailleur to the droupout Fits Sram X-9 type rear derailleurs. 6 grams This is for ONE bolt only |
| Gold Pivot Bolt |
| Blue Pivot Bolt |
| Black Pivot Bolt |
| Red Pivot Bolt |
| 10 Purple End Caps |
| 10 Blue End Caps |
| 10 Gold End Caps |
| 10 Orange End Caps |
| 10 Green End Caps |
| AEST 11T 7075 Anodized Derailleur Jockey Wheels New for 2014 |
| Gold Campy Pivot |
| Blue Campy Pivot |
| Hollow Aluminum Rear Derailleur Jockey Wheel Bolt Pair |
| These fit all Shimano and any derailleur using countersunk bolts. Drilled thru in the center. M5 Bolt. 1.4 grams for the pair |
| $5.00 |
| Silver Bolt Pair |
| Blue Bolt Pair |
| Black Bolt Pair |
| Gold Bolt Pair |
| Red Bolt Pair |
| Purple Bolt Pair |
| Complete Shimano Rear Derailleur Aluminum Upgrade Kit with AEST Pulleys |
| This is for a complete Shimano Aluminum bolt and pulley upgrade kit. This will fit all Shimano except for Shadow. This kit includes: A pair of 11t jockey wheels with oversized bearings Hollow rear derailleur pivot bolt A pair of hollow jockey wheel bolts. Aluminum m5x8.5mm pinch bolt, Aluminum derailleur cable adjuster, m4x16 stop bolt for the spring tensioner. Complete kit weighs 29 grams. |
| Red Kit |
$30.00
| Silver Kit |
| Gold Kit |
| Blue Kit |
| Black Kit |
| Purple Kit |
| AEST 7075 Anodized aluminum jockey wheels. For use with all Shimano type systems. These have oversized sealed ball bearing for crisper shifting. Bearing size = 9mm ID -17mm OD - 5mm thick 19 grams for the set Please note: Side caps are matching color as in the photo. These bearings are steel shielded |
| Red 2014 Pulleys |
$13.00
| Black 2014 Pulleys |
| Silver 2014 Pulleys |
| Gold 2014 Pulleys |
| Purple 2014 Pulleys |
| Aluminum Hollow Rear Derailleur Pivot Bolt Kit - Shimano - 8.5 grams |
| Red |
| $16.00 |
| This kit includes: Hollow rear derailleur pivot bolt A pair of hollow jockey wheel bolts. Aluminum m5x8.5mm pinch bolt, Aluminum derailleur cable adjuster, m4x16 stop bolt for the spring tensioner. Complete kit weighs 9 grams. Not for Shadow. |
| Black |
| Gold |
| Blue |
| Purple |
| Pink |
| Jockey Wheels, Shimano Derailleur Parts, Derailleur Pulleys |
| This is for one wheel (no bearing) for those Sram systems that uses a special type wheel. At this time we are not selling with the bearings so will require the ues of your old bearing. On Install clean the outside race of the old bearing and place a line of contact cement on the outside race. Allow this to setup about 10 minutes then press the bearing into place. |
| Sram Jockey Wheels Blanks - Anodized Aluminum |
| $5.50 |
| Raw Silver |
| Red Wheel Blank |
| Black Wheel Blank |
| Gold Wheel Blank |
| Blue Wheel Blank |
| Green Wheel Blank |
| Purple Wheel Blank |
| Pink Wheel Blank |
| Orange Wheel Blank |
| Sram Titanium Derailleur Jockey Wheel Bolt Pair |
| $6.00 |
| This is for a titanium derailleur wheel bolt pair for Sram. Please check the bolt style you have to make sure it is this. Some systems use countersunk bolt instead. |
| Shimano Titanium Derailleur Jockey Wheel Bolt Pair - Hollow Version |
| $5.00 |
| This is for a titanium derailleur wheel bolt pair for Shimano. Drilled thru in the center for weight reduction. 5mm bolt |
| $5.00 |
| Orange 11t Solid Wheels |
| Anodized Red |
| Far and Near Derailleur Tuning Kits with Jockey Wheels |
| Far and Near complete derailleur tuning kits are available for Shimano (Not for 9000 series), Campy and some Sram front and rear derailleurs. Please check your derailleur to make sure is proper. Some Sram use different pulleys (Shown on the bottom of this web page). All parts are 7075 series aluminum. The pulleys come with one 4mm brass sleeve as some units use one 4mm bolt. Please note the kits on mail order do not come with packaging due to excessive shipping costs. Will update shortly with weights and more information |
| Shimano Red |
| Shimano Kits: Not made for 9000 series although most will fit anyways. Please note this kit had 5 spoke pulleys. The jockey wheels are a bit different from the stock photo Not for Shadow. |
| Shimano Gold |
| Shimano Black |
| Shimano Blue |
| Sram Tuning Kit |
| Campy Tuning Kit |
| Shimano Tuning Kit |
| Please note the kits on mail order do not come with packaging due to shipping costs. |
| AEST 7075 Anodized aluminum jockey wheels. For use with all Shimano type systems. These have oversized sealed ball bearing for crisper shifting. Bearing size = 9mm ID -17mm OD - 5mm thick 19 grams for the set Please note: Side caps are matching color as in the photo. These bearings are steel shielded This sale is for the 4 slot version as shown in the photo. |
| Far and Near Jockey Wheel Bolt Pair for Campagnolo Derailleurs - Torx Socket |
$6.00
| Red Campy Bolts |
| These are Alloy Jockey wheel bolts for Campy type derailleurs (Will work on Shimano as well). m5x15mm bolt (total length) The base has a bit of a chamber. 12mm head diameter. 2 grams per pair. Sold as a pair. |
| Black Campy Bolts |
| Silver Campy Bolts |
| Blue Campy Bolts |
| Green Campy Bolts |
| Gold Campy Bolts |
| $79.00 Full Kit 52.00 Without Pulleys Specify color at checkout on the kis with no wheels |
| Far and Near 11t Jockey Wheel Set |
$20.00
| Aluminum Jockey Wheels for Shimano and Campy Derailleurs. These are for 5mm bolt applications 11t, sealed bearings, silky smooth |
| Far and Near 11t Red Pulleys |
| Far and Near 11t Black Pulleys |
| AEST 12t Jockey Wheel Set |
$18.00
| Aluminum Jockey Pulleys 12t, sealed bearings. These are larger than stock Shimano that usually use 11t. Please note the photo shows 11t with ceramic bearings. These are 12t and have standard bearings. |
| AEST 12t Red Pulleys |
| AEST 12t Silver Pulleys |
| AEST 12t Black Pulleys |
| Far and Near Cable adjusters have a 5mm bolt measurement. Will fit most Shimano derailleurs and many types of brake levers. There is a spring lock with an o-ring to keep debris out of the threads. 2.8 grams. Price is for ONE |
| Far and Near Cable Adjusters |
| Black |
| $8.00 |
| Red |
| Blue |
| Gold |
| This is for a pair of Precision Billet jockey wheels. These will fit vintage proshift and most other derailleurs including Shimano. These are all made in Canada and anodized in house. These have a metal shielded ball bearing for easier spinning. ID is for 5mm bolts. Total width including caps is 8mm. Gold side caps only |
| Precision Billet 10t Jockey Wheel Set - Retro Style |
| $20.00 |
| Silver |
| Black |
| Red |
| Blue |
| Gold |
| Green |
| Orange |
| Purple |
| Far and Near 11t Jockey Wheel Set - Ceramic Bearings |
$40.00
| Aluminum Jockey Wheels for Shimano and Campy Derailleurs. These are for 5mm bolt applications. One pulley has a bushing that can be removed for use with a 4mm bolt. 11t, sealed bearings,. 18 grams for the set. |
| Ceramic Far and Near 11t Red Pulleys |
| Ceramic Far and Near 11t Black Pulleys |
| Far and Near 12t Jockey Wheel Set - Sram XX1 - Narrow/Wide |
$22.00
| Aluminum Jockey Wheels for Sram XX1 9/10 speed 12t, sealed bearings, silky smooth. One of these pulleys has a removable bushing so it can be used with a 4mm bolt. These can be used with Shimano / They have a different tooth design Red side caps on this version. 11 grams each. 7075 Aluminum |
| 12t Red Pulleys |
| 12t Black Pulleys |
| 12t Gold Pulleys |
| 12t Blue Pulleys |
| 12t Silver Pulleys |
| 12t Grey Pulleys |
| 12t Green Pulleys |
| Far and Near 11t & 13t Jockey Wheel Set - Sram 11 Speed |
$22.00
| Aluminum Jockey Wheels for Sram 11 speed 13t up and 11t down, sealed bearings, silky smooth. The 13t pulley has a removable bushing so it can be used with a 4mm bolt. These can be used with Shimano / The 13t pulley has a different tooth design 12 grams each. |
| 13t Red Pulleys |
| 13t Black Pulleys |
| 13t Gold Pulleys |
| 13t Blue Pulleys |
| 13t Silver Pulleys |
| 13t Green Pulleys |
| Titanium Jockey wheel set. Titanium side caps. Free spinning Stainless Steel shielded bearing. 8mm width, for use with 5mm bolts. Made in Canada. 17.5 grams for the set |
| Titanium Jockey Wheel Set - Ultralight Version |
$25.00
| Gold Titanium |
| Blue Titanium |
| Silver Titanium |
| Gold Anodize to side caps only (No Charge) |
| On Sale Now! |
| 3 Slot Red |
| Ceramic Bearings: Black- Red Caps |
$35.00
| Far and Near derailleur Aluminum Jockey Wheel Bolt Pair. Blue loctite ends 1 gram for the pair Photo will be updated shortly |
| Far and Near Derailleur Jockey Wheel Bolt Pair |
| Silver |
| Red |
| Green |
| Black |
| $5.00 |
| Gold |
| Blue |
| Sram Black |
| Sram Kits: Please check your derailleur to make sure it uses standard Shimano type pulleys. Please note this kit had 5 spoke pulleys. The jockey wheels are a bit different from the stock photo |
| Sram Red |
| Campy Black |
| Campy Kits: Please check your derailleur to make sure it uses standard Shimano type pulleys.Please note this kit had 5 spoke pulleys. The jockey wheels are a bit different from the stock photo |
| Campy Red |
| Sram Black - No Wheels |
| Campy Gold |
| Campy Blue |
| Sram Blue |
| Sram Gold |
| Please Note: Stock Shimano kits are not compatiable with Shimano Shadow |
| Pink 11t Solid Wheels |
|
| Add Tracking to your Order: Canada = 8.00 USA = 12.00 International = 40.00 |
| Please note that a tracking number is extra cost and is very expensive overseas. Some orders take extra time so please be patient if a delay occurs. Please check our FAQ page if you have a question |
| Vertical dropouts hold the rear axle at a fixed distance from the cranks and nine times out of ten this doesn’t put the rear wheel at the right spot for a single speed drivetrain. The result is a chain that is too loose or too tight. The Melvin takes care of the chain tension and lets you run a single speed wheel on almost any frame with a derailleur hanger. The Melvin uses two pulleys, just like a rear derailleur, which gives it 20 teeth of chain wrap. This means that the Melvin will work with multiple front chain rings while maintaining proper chain tension. Of course this is no longer a true single speed, but can come in handy when two or three gears are all you need. Twenty teeth of chain wrap means that chain rings with a maximum difference of twenty teeth can be used up front. The mounting pivot has spacers that can be arranged to adjust the chainline. The Melvin works best, of course, with our hubs, but the chainline spacers allow it to work with most other hubs too. In addition to the pivot spacers, the pulleys have side to side float to quiet slight variances in chainline. The pulleys are made of extruded and machined aluminum and have sealed bearings for durability. They are 2.25mm thick at the tooth which fits inside most narrow multi-speed chains, and the pulley cage is wide enough to allow 1/8″ single speed chains as well. 6061 Aluminum Weight 76g Chainline 19mm-27mm Largest Rear Cog 20 teeth Chain Wrap 20 Teeth↓ |
| Paul Components- Melvin Chain Tensioner |
$89.00
| Black Melvin |
| Silver Melvin |
| KCNC 11t Black |
| $2.90 |
| Black M4x17 |
| Shipping Information Please check out the shipping page for shipping rates and information. |
| All Prices are in US Dollar $5.00 - $10.00 Shipping via Air Mail for orders under 50.00. Orders over 50.00 must have trackable shipping ---Tracking is extra Costs--- |
| Anodize World Dyes and Supply |
| Campy No Wheels |
| Red Pulleys |
| Silver Pulleys |
| $2.60 |
| Natural M4x16 |
| $2.50 |
| Natural M4x15 |
| $2.30 |
| Natural M4x10 |
| Shimano No Wheels |
| $6.00 |
| Raw Ti |
| Black Ti |