Derailleur Cable Hex
O-Ring (set of 9)
Brake Cable Hex
O-Ring (set of 9)
Spoke Wrench for Mavic Wheels #12H2
This is for a one  Spoke
Wrench for Mavic Wheel
Integrated Bottom Bracket Tool #11F1
This is for a Crank
Adaptor Tool for
Integrated BB's and
Shimano Hollowtech II,
Cr-Mo Steel, Heat
For use with 8mm hex
key or 3/8” driver.
Heavy Duty Down Hill Tire Lever
This is for a Screwdriver
Type Down Hill Tire Lever.
Made of Cr-V Steel with a
Rubber Handle.
T-25 Compact Torx Tool (Disc Brake Rotor Bolts)
This is for a torx type tool.
This is used on standard
t-25 disc brake rotor bolts.
100mm long.
Truvativ Type Bottom Bracket Tool
This is for a Truvativ
type BB tool. It will
also work on Token
BB's. 8 Teeth
Park  Campy / Veloce Bottom Bracket Tool
This tool is made to install or remove the
star-shaped Campagnolo Veloce, Mirage, and
Avante cartridge bottom bracket cups.
This is for a 4-Notch BMX
Freewheel Remover tool.
4-Notch BMX Freewheel Remover #09E1
This is for a Cassette
Freewheel tool. This tool
holds the cassette when
removing the lockring.
Cassette Freewheel Chain Whip Tool
This is for a  8-groove
spoke tool, for 10-15G
Universal Spoke Wrench
Headset Cup Removal Tool
Fits standard and oversize
This item only ships to the
USA and Canada
This is for a Cable Cutter. This is slightly
different from the photo. This has a little
cup with pin to clean up cable housing
after it's been cut
Cable Cutter
This tool serves as a 2-part puller to
remove the crank arms from the bottom
bracket spindle.
length 6 1/2 in. width 1 in.
Fits cranks with 22m threads.
Park Crank Puller Tool
This item only ships to
the USA and Canada
Compact crank arm puller.
For use with all cranks.
Mini Crank Puller Tool
Metric Hand Taps
Stainless steel
high speed taps.
Ground Threads.
Use lubricant.
Metric Hand Taps
M4 x 0.7 Pitch
M3 x 0.5 Pitch
M5 x 0.8 Pitch
M6 x 1.0 Pitch
M8 x 1.25 Pitch
M10 x 1.25 Pitch
Screw Pitch Gage
Made of tempered steel.
With 60-degree thread
profiles and locking
Range: 0.25-6 mm
Leaves: 24
Screw Pitch Gage
Carbon steel
Use lubricant.
Metric Dies
M4 x 0.7 Pitch
M5 x 0.8 Pitch
M6 x 1.0 Pitch
M8 x 1.25 Pitch
M10 x 1.5 Pitch
M10 x 1.25 Pitch
M10 x 1.5 Pitch
M7 x 1.0 Pitch
Campy Type Freewheel Cassette Tool / #09B3
This is for a
Campy Cassette
Record/Chorus BB
Shimano MF
Freewheel tool.
Chain Ring Nut/Bolt Removal Tool #27P1
This is for a Chain Ring
Bolt Remover tool. This
holds the slots on
chainring nuts.
This is for one A2Z
Hydraulic Cable
This is used to cut
non-metallic cable
A2Z Hydraulic Cable Cutter    
Shimano type
freewheel tool. Uses a
1/2" drive ratchet. 12
Also used with
Centerlock Hubs.
Shimano Type Freewheel Cassette Tool   
Compact Crank Puller Tool
This is for a
Crank Puller.
It can be
used on both
ISIS and
Square Taper.
Shimano Type Bottom Bracket Spline Tool
This is for a Shimano
type bottom bracket
tool. Uses a 1/2" drive
ratchet. 20 teeth.
Super B - Hub Cone Multi Wrench
Hub Cone Wrench. will fit 4
common nuts: 15, 16, 17,
and 18mm
Spoke Tool Wrench Black
For use with DT Swiss/Wheelsmith
0.127" spoke nipples
Spoke Tool Wrench Green
For use with Euorpean 14g - 15g
0.130" spoke nipples
Spoke Tool Wrench Red
For use with Asian 14g - 15g
0.136" spoke nipples
3 Spoke Tool Wrenches
Super B Compact Chain Tool (Chain Breaker)
This is for a Compact
Chain tool. This will work
on all chains. This version
is Black
King Titanium Tire Lever Pair
3-2.5 Titanium tubing
Tube diameter is about 6mm
8 grams for the pair.
Made in the USA
Super B Heavy Gauge Spoke Wrenches
This spoke wrench is vinyl coated  
handle with chrome plated hardened
steel ends. curved to set into the
spoke for easy turning.
Yellow - Mavic Spline 5.65mm
Black - Mavic Spline 6.4mm
Standard Black 3.2mm
Standard Green 3.3mm
Standard Red 3.5mm
Shipping Information
Please check out FAQ page or Blog for
shipping rates and information.
All Prices are in US Dollar
$5.00 Shipping via Air Mail
Tracking is extra Costs!
Some browsers like FireFox and Opera may
not operate properly with checkout.
If the cart button is missing then I am out of
that item
Please refresh browsers (F5 Key) as I
update this website daily
This page will be updated.
To be added shortly:
Chain Whip
pedal wrench - 33F5
super B - 13, 14, 15, 16
integrated bb wrench
park cnw2 - chainring wrench
ksyrium spoke wrench - 074-b-13
Shimano long handle spoke wrench - 064-a-14
big handle torx tool - walk in only
plastic tire levers
09f3 bmx bb tool
09c0 shimano lock tool - 11t no pin
Heavy Duty Chain Breaker
This is a shop duty
chain breaker. Due to
the weight this item is
Canada only!
Toronto Cycles Store
Bicycle Tools
Contact Us - Privacy
How To Measure Bolts
Warranty and Return
Shipping and Payment
Anodizing Titanium
Home Page
Aluminum Anodizing
Aluminum Bolts
American - USA Titanium
Bar and Grip
Black Titanium Bolts
Brake Levers
Cables / Hose
Chain Ring and Crank
Cycling Computer Stuff
Derailleur Parts
Disc Brake Adapters
Disc Brakes & Rotors
Disc Brake Pads
Gold Nitride Titanium
Headset / Spacer
Hubs / Skewers
Pedal Accessories
Precision Billet
Seat Post - Saddles
Seatpost Clamps
Titanium Nuts & Bolts
Titanium Locks TiGr
Titanium Hardware
Titanium Motorcycle Bolts
Titanium Security Bolts
Titanium Spokes
Miniature Bolts
Vargo Camping Gear
V-Brakes and Shoes
Wheels, Tubes & Tires
Add Tracking to your
Canada = 8.00

USA = 12.00

International = 40.00
Far and Near
Precision Billet
Anodizing Dyes
Paul Components
Titanium Security Bolts
The Paul Components fixed gear lock ring wrench is a
machined lock ring wrench complete with 2
replaceable, reversible hardened steel teeth. Works
with almost all track hub lock rings, even rings with
an odd number of slots, simply remove one tooth. The
long handle reduces the chances of grinding your
knuckles on spokes when loosening and gives more
leverage for tightening. Made in USA.

Handle Material: 6061 Aluminum
Tooth Material: Hardened Steel
Finish: Anodized
Anodized Color: Black
Paul Components- Lock Ring Wrench
Lock Ring Wrench
Filzer Chainring Nut Tool
This shop-grade
T-style wrench makes
tightening and
loosening chainring
nuts a cinch. Steel
shaft and tool head.
Plastic handle.
Lifu Integrated BB Tool - 11f2
For Campagnolo®
Ultra-torque / Shimano®
Hollowtech II /
Truvativ® Howitzer
compatible crank
Cr-Mo steel.