| Ashima IS to IS Adaptor |
| This allows a larger diameter rotor to be used for increased stopping power. For international standard mounts. This adapter increases the following sizes and allows adjustments. 160mm-203mm #AU12 |
| This Adapter will fit most bikes with flat rear drop-outs and adds International Standard mounts for rear disc brakes. Easy to install and remove - no need to alter your frame Put on and take off rear wheel with your existing quick release Works with standard disc hubs CNC Machined Weight: 123g |
| A2Z Universal Rear Disc Brake Mount Adapter #DM-UNI |
Parallel Mount Adapter - (AD-PMR)
| The AD-PMF74 is specifically designed to convert Manitou fork post mounts to International Standard. The AD-PMF74 is for Manitou forks with 74mm (bolt center to bolt center) post mounts. ***Requires increasing rotor size 20 - 25mm.*** 160mm-180mm or 180mm-203mm Weight: 43g |
Manitou Post Mount Adapter (160-180 / 180-203) #PMF74
The AD-CLK v.3.0 center lock disc brake adapter allows a standard disc to be used on a center lock hub. Includes stainless steel bolts. This is the new style. 100% CNC 30 Grams |
| Center Lock Disc Adapter : Convert To Standard Disc #AD-CLK v.3.0 |
| This is a Disc Brake Adapter that allows an increase in rotor size (160/165mm to 203mm). This uses standard 74mm post mounts and allows use of post mount calipers. #PMPM203 |
Post Mounts (160mm - 203mm) #PMPM203
| This is a Disc Brake Adapter that Converts a Rock Shox Boxxer to allow use of a Post Mount Caliper. This allows the use of either 180 or 203mm rotor from a 160mm. Contains all hardware. #AD-ISPM203BOX |
$19.50
| A2z Disc Brake Adapter : Rock Shox Boxxer to Post Mount |
| This is a Disc Brake Adapter that Converts a International Standard Fork to allow use of a Post Mount Caliper. This is used with Skewer Type forks. This allows the use of a 203mm rotor from a 160mm. - Converts International Standard (IS) type caliper mounting to Manitou type Post Mount (PM) mounting - Enlarge rotor size from 160mm diameter to 203mm - Allow to adjust disc caliper to align with rotor |
$19.50
A2z Disc Brake Adapter : IS Fork to Post Mount Caliper #ISPM203R
| This is a Disc Brake Adapter that Converts a International Standard Fork to allow use of a Post Mount Caliper. This is used with 20mm Thru-Axle forks. This allows the use of a 203mm rotor from a 160mm. - Converts International Standard (IS) type caliper mounting to Manitou type Post Mount (PM) mounting - Enlarge rotor size from 160mm diameter to 203mm - Allow to adjust disc caliper to align with rotor - Fit O.L.D 110 fork 20mm thru-axle hub version. |
$19.50
A2z Disc Brake Adapter : IS Fork to Post Mount Caliper #ISPM203-110
$18.00
$25.00
This disc brake adapter allows a larger diameter rotor to be used for increased stopping power. For international standard mounts. This adapter increases the following sizes and allows adjustments. Includes hardware. 160/165mm - 203mm 43 Grams |
| A2Z International Standard Disc Brake Adapter 160mm-203mm #AD_638 |
$22.00
$18.00
$22.00
| This is an Ashima Disc Brake Adapter that allows an increase in rotor size (160/165mm to 180/a85mm). This uses standard 74mm post mounts and allows use of post mount calipers. #AU31 |
| Ashima Post Mount-Post Mount Adapter 160mm-180mm #AU31 |
$17.00
| This is an A2z Disc Brake Adapter that allows an increase in rotor size (160/165mm to 180/a85mm). This uses standard 74mm post mounts and allows use of post mount calipers. #PMPM_180 |
| A2z Post Mount-Post Mount Adapter 160mm-180mm |
$9.00
| www.torontocycles.com |
| This is a center lock disc brake adapter allows a standard disc to be used on a center lock hub. stainless steel bolt. Aluminum Body. includes Lockring. 27.5 Grams |
| Center Lock Disc Adapter |
$27.00
Sorry...Sold Out
| This adapter converts parallel (22mm chainstay) mounts found on Trek, Klein, Schwinn and Jamis bikes, etc. to Post Mount Calipers. NOTE: This adapter gets around the common problem of the caliper hitting the seat stay tube. The lower photos shows an example of this on a friend`s bike. We do not have a frame compatibility list due to the vast number of frames and factors such as frame size and model year changes, so we can not answer questions on specific bikes. Please use the picture with measurements below to determine fit prior to ordering. Requires no rotor size increase. Weight: 155g Does NOT include mounting hardware |
| B&S Rear Parallel Mount Adapter - Post Mount Calipers |
$22.00
| Blue Adapter |
| Gold Adapter |
| Shimano Hydraulic Brake Caliper Titanium Bolt Kit |
| Hayes Mag Brake Caliper Titanium Bolt Kit |
$23.00
$26.00
2000 Trek 8500 LT Modification
Some Trek needs a
modification where the
base plate needs to be
cut to clear. Photo to the
right shows example
modification where the
base plate needs to be
cut to clear. Photo to the
right shows example
| Pink Adapter |
| This adapter is specifically designed to convert Manitou fork post mounts to International Standard. For older Manitou forks with 68mm (bolt center to bolt center) post mounts. ***Requires increasing rotor size 25mm.*** 160mm-180mm or 180mm-203mm Weight: 41g |
B&S Post Mount Adapter (Old Style Manitou - 68mm)
$18.00
| Blue Adapter |
| Gold Adapter |
| This kit is a titanium bolt upgrade for B&S adapters. (Also for some other type adapters) The kit includes: 2 m6x10 hex flange bolts, 2 m6x17.5mm bolts, 4 m6 washers and 2 m6 locknuts. (Might be non-taper head if I am low on stock of taper head) Weight: 41g |
| Titanium Bolt Mount Kit For B&S Adapters |
$20.00
| B&S Kit |
| The AD-PMR converts parallel (22mm chainstay) mounts found on Trek, Klein, Schwinn and Jamis bikes, etc. to International Standard. NOTE: Fit of the AD-PMR is limited by the amount of space available between the seatstay and chainstay and will not fit all frames. You may also be limited to using a smaller, International Standard specific hydraulic brake with this adapter (more than likely you will not be able to use Avid mechanicals). We do not have a frame compatibility list due to the vast number of frames and factors such as frame size and model year changes, so we can not answer questions on specifc bikes. Please use the picture with measurements below to determine fit prior to ordering. Requires increasing rotor size 20 - 25mm. Please make sure your frame will accept a larger rotor prior to ordering. Weight: 45g |
| This shim kit allows the use of a smaller sized handlebar in a 31.8mm stem. The 26.0mm kit shims a standard 31.8mm clamp to fit 26.0mm handlebars. The 25.4mm kit shims a standard 31.8mm clamp to fit 25.4mm handlebars. 26 grams per pair. Anodized blue aluminum. |
| Handlebar Adapter - Shim Kit for 31.8mm Stems |
$9.00
| 25.4mm Shim Kit |
| 26.0mm Shim Kit |
| $5.00 Shipping |
$18.00
| The B&S 74mm adapter is specifically designed to convert Manitou fork post mounts to International Standard. For Manitou forks with 74mm (bolt center to bolt center) post mounts. For use with Calipers that use International Standard Mounts. ***Requires increasing rotor size 20 - 25mm.*** 160mm-180mm or 180mm-203mm Weight: 46g |
| B&S Adapter: 74mm Manitou Post Mount to I.S. Calipers |
| Black 74mm Adapter |
| Red 74mm Adapter |
| Blue74mm Adapter |
| Red 74mm Adapter |
| I have received heavier adaptors from B&S. These are about 25g heavier than the old version. and should help with any flexing. Also on the above adaptor I cannot warranty these. I will accept return on this if un-damaged. Use at your own risk and please be careful mounting. Tip: If you can tie the adaptor to the upper riser tube it will help with support of the long span. |
| _______________________________________________ |
| Disc Brake Adaptors |
| All Titanium fasteners and bolts are Grade 5 / 6al-4v |
| Red Adapter |
| Please note that a tracking number is extra cost and is very expensive overseas. Some orders take extra time so please be patient if a delay occurs. |
| Paypal, Credit Cards and Checks Accepted |
Orders ship for 5.00 via Air Mail
| We ship Worldwide. |
| All Prices are USD |
|
| Add Tracking to your Order: Canada = 8.00 USA = 12.00 International = 40.00 |
| This is for a disc brake caliper adapter. This allows a Post Mount caliper to be used on an International Standard Fork. Includes 2 bolts and washers for the caliper AU02 = Rear 160mm AU03 = Front 180mm AU04 Rear 180mm AU05 = Front 203mm AU06 = Rear 203mm |
| Disc Brake Caliper Adapter: IS Mount Fork to Post Mount Caliper |
$8.00
| This is a Disc Brake Adapter that Converts a 74mm Manitou Post Mounts to International Standard and increases rotor size from 6" to 8"(160/165mm to 203mm). Contains all hardware. #M203 CNC Machined / 33g without bolts. |
$19.50
Ashima / Post Mount - International
Standard (160mm-203mm) #M203
Standard (160mm-203mm) #M203
This disc brake adapter allows a larger diameter rotor to be used for increased stopping power. For international standard mounts. This adapter increases the following sizes and allows adjustments. Includes Hardware 160/165mm - 180/185mm 30.4 Grams |
| KCNC International Standard Disc Brake Adapter 160mm-180mm |
$20.00
| Converts non-disc frame to mount rear disc brake type caliper. Contains: adapter plate, adjuster bar, rear qr skewer and hardware Adapter plate is CNC machined Adjuster bar length 145mm or 170mm Not suitable for frames that does not have rear brake boss as the adapter needs the brake boss mount. For use with international standard calipers. Instruction included Weights 252 grams/set (with hardwares) Weight: 252g |
| Rear Disc Conversion Kit - Mounts To Non-Disc Frame |
$50.00
| More Information Coming Soon on This Item |
| This item only ships the United States and Canada. |