Titanium Shock (Frame) Mount Bolts
Used on many Frame and Shock mount
applications.
These have a longer shank than standard
bolts. 16mm threaded.
M8 Threads. Shallow head Style.
Titanium Shock (Frame) Mount Bolts
$7.00
M8x75mm (59mm unthreaded)
$5.75
M8x50mm (34mm unthreaded)
$6.50
M8x65mm (49mm unthreaded)
$6.50
M8x60mm (44mm unthreaded)
$4.25
M6x30mm (22mm unthreaded)
Titanium Shock (Frame) Mount Bolts
Used on Cannondale and other m6 Frame and
Shock mount applications.
These have a longer shank than standard bolts.
M6 Threads. Shallow head Style.
Titanium Shock (Frame) Mount Bolts
M6 - Cannondale Scapel
$5.00
M6x45mm (36mm unthreaded)
$5.25
M8x40mm (24mm unthreaded)
$6.80
M8x70mm (54mm unthreaded)
$7.50
M8x90mm (74mm unthreaded)
$4.65
M6x35mm (25mm unthreaded)
$5.50
M8x45mm (29mm unthreaded)
$4.60
M8x30mm (14mm unthreaded)
$6.00
M8x55mm (39mm unthreaded)
$16.00
7mm x 100mm Titanium Quill Bolt
Non Taper Head
1.0 Thread Pitch - 11mm head diameter
Threaded Section = 24mm
$18.00
7mm x 120mm Titanium Quill Bolt
Non Taper Head
1.0 Thread Pitch - 12mm head diameter
Threaded Section = 27mm
$20.00
7mm x 130mm Titanium Quill Bolt
Non Taper Head
1.0 Thread Pitch - 12mm head diameter
Threaded Section = 28mm
$22.00
7mm x 140mm Titanium Quill Bolt
Non Taper Head
1.0 Thread Pitch - 12mm head diameter
Threaded Section = 28mm
$20.00
8mm x 130mm Titanium Quill Bolt
Non Taper Head
1.25 Thread Pitch - 13mm head diameter
Threaded Section = 25mm
$22.00
8mm x 140mm Titanium Quill Bolt
Non Taper Head
1.25 Thread Pitch - 13mm head diameter
Threaded Section = 25mm
$18.00
8mm x 120mm Titanium Quill Bolt
***Taper Head***
1.25 Thread Pitch - 13mm head diameter
Threaded Section = 28mm
$19.00
8mm x 130mm Titanium Quill Bolt
***Taper Head***
1.25 Thread Pitch - 13mm head diameter
Threaded Section = 28mm
$17.00
8mm x 100mm Titanium Quill Bolt
Non Taper Head
1.25 Thread Pitch - 13mm head diameter
Threaded Section = 20mm
$17.00
8mm x 100mm Titanium Quill Bolt
***Taper Head***
1.25 Thread Pitch - 13mm head diameter
Threaded Section = 28mm
$16.00
6mm x 130mm Titanium Quill Bolt
***Taper Head***
1.0 Thread Pitch - 10mm head diameter
Threaded Section = 24mm
Titanium BMX and Vintage Style Axle Nuts
M14 x 1.0 Pitch Flange Nut
$6.00
Socket Size = 19mm
Height = 14mm
Flange Diameter = 26mm
3/8 x 26tpi Pitch Flange Nut
$4.00
Socket Size = 15mm
Height = 10.6mm
Flange Diameter = 19.7mm
Fits most front wheels and freewheel 3/8" rear wheels -
will NOT fit rear Skyway or coaster brake rear
wheels
3/8 x 24tpi Pitch Flange Nut
$4.00
Socket Size = 17mm
Height = 10.6mm
Flange Diameter = 22mm
5/16 x 24tpi Pitch Flange Nut
$4.00
Socket Size = 14mm
Height = 10.5mm
Flange Diameter = 18.6mm
3/8 x 26tpi Pitch Flange Nut
$4.30
This uses a larger socket and flange
Socket Size = 17mm
Height = 10.6mm
Flange Diameter = 21.8mm
3/8 x 24tpi Pitch Flange Nut
$4.00
Socket Size = 15mm
Height = 10.6mm
Flange Diameter = 22mm
Skyway mags (coaster or freewheel) and most coaster
brake rear wheels with 3/8" axles
Titanium BMX and Vintage Tandem Axle Nuts - 3/8x26tpi
3x8 x 26tpi Standard Axle Nut
$5.00
Socket Size = 17mm
Height = 8mm
These types of nuts are very common
for vintage tandems and BMX
applications. The matching, thinner,
adjusting nuts are also posted.
Ti Locking Flange Axle Nuts
3x8 x 26tpi Lock-Flange Axle Nuts
$6.00
Socket Size = 15mm
Height = 13.5mm
Flange Diameter = 19.7mm
These types of nuts are very common for
vintage tandems and BMX where a locking
nut is needed. The matching, thinner,
adjusting nuts are also posted.
Ti Adjusting Nut- 5mm Thick - To Adjust Hub Tension
3x8 x 26tpi Thin Adjuster Axle Nuts
$4.00
Socket Size = 15mm
Height = 5mm
These types of nuts are very common for
vintage bikes. This is the thin nut that sits
on the inside of the fork and is used to adjust
the hub tension bearing.
Titanium BMX and Vintage Tandem Axle Nuts - 3/8x24tpi
3x8 x 24tpi Standard Axle Nut
$5.00
Socket Size = 17mm
Height = 8mm
These types of nuts are very common
for vintage tandems and BMX
applications. The matching, thinner,
adjusting nuts are also posted.
Ti Locking Flange Axle Nuts
3x8 x 24tpi Lock-Flange Axle Nuts
$6.00
Socket Size = 15mm
Height = 13.5mm
Flange Diameter = 19.7mm
These types of nuts are very common for
vintage tandems and BMX where a locking
nut is needed. The matching, thinner,
adjusting nuts are also posted.
Ti Adjusting Nut- 5mm Thick - To Adjust Hub Tension
3x8 x 24tpi Thin Adjuster Axle Nuts
$4.00
Socket Size = 15mm
Height = 5mm
These types of nuts are very common for
vintage bikes. This is the thin nut that sits
on the inside of the fork and is used to adjust
the hub tension bearing.
Titanium Bicycle Frames, Titanium Forks, Titanium Frame Anodizing
We have standard axle nuts on the titanium bolt
page
M9 x Titanium Flange Nut
$4.00
These are common on many
track hubs.
$16.00
6mm x 130mm Titanium Quill Bolt
***Non-Taper Head***
1.0 Thread Pitch - 10mm head diameter
Threaded Section = 24mm
Titanium Quill Bolts
Titanium Stem Expander Bolts
Below I have listed a few sizes for Quill applications.
If you have a size you need and is not listed then please let
me know and I can try to produce.
3/8 x 26tpi Pitch Standard Nut
$4.30
This has no flange (Regular Nut)
Socket Size = 17mm
Height = 10mm
Flange Diameter = No Flacnge
This is for ONE Far and Near Shox Cap.
Made from 6061AL with a NBR o-ring.
These make a positive seal and have an
o-ring on the outside for additional
grip in tight locations
2g each. US Threading.
Price is for ONE Cap
Far and Near Shox Caps
$4.50
Blue
Black
Red
Gold
Silver
$7.00
M8x75mm (59mm unthreaded)
$6.80
M8x70mm (54mm unthreaded)
Black Titanium Shock (Frame) Mount Bolts
$23.00
7mm x 150mm Titanium Quill Bolt
Non Taper Head
1.0 Thread Pitch - 12mm head diameter
Threaded Section = 25mm
$23.00
8mm x 150mm Titanium Quill Bolt
Non Taper Head
1.25 Thread Pitch - 13mm head diameter
Threaded Section = 25mm - 35 grams
All titanium bolts, metric fasteners, nuts
and hardware is Grade 5 Ti.
6AL-4V.
Titanium BMX /Vintage Style Axle
Nuts / Shock and Quill Bolts
Are located on the
FRAMES page
of this website.
Other bolt items related to a
component are on other pages.
Titanium BMX and Vintage
Style Axle Nuts are on the
Frames page
Shipping Information
Please check out FAQ page or Blog for
shipping rates and information.
Please Note that Tracking
From Canada is Costly and
Extra Charges Apply
All Prices are in US Dollar
$5.00 Shipping via Air Mail
Tracking is extra Costs!
Please refresh browsers (F5 Key) as I
update this website daily
Toronto Cycles Blog
Titanium Hex Flange bolts and nuts will be
moved to the Titanium Motorcycle Page
$4.85
M6x40mm (25mm unthreaded)
Far and Near Thru Axles
Far and Near Thru Axles
$30.00
Please Note these are BLACK Aluminum
Rock Shox Boost - 15mm-110
Fox Shox Boost - 15mm-110
Rock Shox - 15mm-100
Fox - 15mm-100
Maxle - 12mm-142
E-Thru - 12mm-142
Quill Bolts are Below.
$17.50
8mm x 110mm Titanium Quill Bolt
Non Taper Head
1.25 Thread Pitch - 13mm head diameter
Threaded Section = 26mm
$24.00
8mm x 165mm Titanium Quill Bolt
Non Taper Head
1.25 Thread Pitch - 13mm head diameter
Threaded Section = 25mm
1.0 Pitch - Syntace - 12mm-142
E-Thru - 12mm-142
Contact Us - Privacy
How To Measure Bolts
FAQ
Warranty and Return
Shipping and Payment
Anodizing Titanium
Add Tracking to your
Order:
Canada = 8.00


USA = 13.00


International = 40.00
Please note that a tracking number is
extra cost and is very expensive
overseas. Some orders take extra time
so please be patient if a delay occurs.
Please check our FAQ page
if you have a question
Home Page
Aluminum Anodizing
Aluminum Bolts
American - USA Titanium
Bolts
Bar and Grip
Black Titanium Bolts
Brake Levers
Cables / Hose
Cages
Bearings
Chain Ring and Crank
Cycling Computer Stuff
Derailleur Parts
Disc Brake Adapters
Disc Brakes & Rotors
Disc Brake Pads
Frames
Gold Nitride Titanium
Bolts
Headset / Spacer
Hubs / Skewers
Pedals
Pedal Accessories
Precision Billet
Seat Post - Saddles
Seatpost Clamps
Spoke & Nipple
Titanium Nuts & Bolts
Titanium Locks TiGr
Titanium Hardware
Titanium Motorcycle Bolts
Titanium Security Bolts
Tools
Toys
Miniature Bolts
Vargo Camping Gear
V-Brakes and Shoes
Wheels, Tubes & Tires
  Archives
AEST
Far and Near
Precision Billet
Anodizing Dyes
Paul Components
Titanium Security Bolts
The main problem with spicy is that stock bolts are fully
threaded and damag
e shock bushings which causes
creaking. This is a common problem of Lapierre
Spicy\Zesty 2014\2015 bikes.
These are m8 countersunk bolts.
Titanium Frame Bolts - Lapierre Spicy 2014
$4.60
M8x30mm (6mm unthreaded)
$5.50
M8x45mm (8mm unthreaded)