| Tools |
| Derailleur Cable Hex O-Ring (set of 9) |
$0.95
| Brake Cable Hex O-Ring (set of 9) |
$0.95
| Shimano type freewheel tool. Uses a 1/2" drive ratchet. 12 Tooth. Also used with Centerlock Hubs. |
| Shimano Type Freewheel Cassette Tool |
| Spoke Wrench for Mavic Wheels #12H2 |
$9.00
$7.00
| This is for a one Spoke Wrench for Mavic Wheel Systems. |
| Integrated Bottom Bracket Tool #11F1 |
$10.00
| This is for a Crank Adaptor Tool for Integrated BB's and Shimano Hollowtech II, Cr-Mo Steel, Heat Treated. For use with 8mm hex key or 3/8” driver. |
| Chain Ring Nut / Crankarm Dustcap Multi Tool |
$5.50
| This is for a chainring nut - BB cover tool. on one end it fits into the slots of chainring nuts and prevents them from turning. On the other end it has tabs to remove self-extracting carankrm dustcaps. |
$12.00
| Compact Chain Tool (Chain Breaker) |
| This is for a Compact Chain tool. This will work on all chains. |
| Shimano Type Bottom Bracket Spline Tool |
$13.00
| This is for a Shimano type bottom bracket tool. Uses a 1/2" drive ratchet. 20 teeth. |
| Campy Type Freewheel Cassette Tool / #09B3 |
$10.00
| This is for a Campy Cassette and Record/Chorus BB Shimano MF Freewheel tool. |
| Chain Ring Nut/Bolt Removal Tool #27P1 |
$6.00
| This is for a Chain Ring Bolt Remover tool. This holds the slots on chainring nuts. . |
| Star Nut Installation Tool |
$14.95
| This is for a star nut tool. This ensures correct alignment and installation of star nuts. For 1 1/8" forks. |
| Heavy Duty Down Hill Tire Lever |
$11.00
| This is for a Screwdriver Type Down Hill Tire Lever. Made of Cr-V Steel with a Rubber Handle. |
| P-Handled Torx T25 Wrench (Disc Brake Rotor Bolts) |
$8.50
| This is for a P-Handled Torx T25 Wrench. This is used on most Torx Disc Brake Rotor Bolts. |
| T-25 Compact Torx Tool (Disc Brake Rotor Bolts) |
$5.00
| This is for a torx type tool. This is used on standard t-25 disc brake rotor bolts. 100mm long. |
| Truvativ Type Bottom Bracket Tool |
$13.00
| This is for a Truvativ type BB tool. It will also work on Token BB's. 8 Teeth |
| Hub Cone Wrench |
$4.00
| This is for a one hub cone wrench. These are used on hub bearing adjusters. |
| Hub Cone Wrench / 13mm-14mm |
| Hub Cone Wrench / 15mm-16mm |
| Hub Cone Wrench / 17mm-18mm |
| Park Campy / Veloce Bottom Bracket Tool |
$15.00
| This tool is made to install or remove the star-shaped Campagnolo Veloce, Mirage, and Avante cartridge bottom bracket cups. |
| This is for one A2Z Hydraulic Cable Cutter this is used to cut non-metallic cable |
| A2Z Hydraulic Cable Cutter |
| This is for a Mavic cartridge bearing tool. It also has a spoke wrench tool for Mavic wheels. This is made of steel. |
| Mavic Cartridge Bearing and Spoke Tool |
$11.00
$7.00
| This is for a 4-Notch BMX Freewheel Remover tool. |
| 4-Notch BMX Freewheel Remover #09E1 |
$11.00
| This is for a Cassette Freewheel tool. This tool holds the cassette when removing the lockring. |
| Cassette Freewheel Chain Whip Tool |
$15.00
| This is for a 8-groove spoke tool, for 10-15G nipples. |
| Universal Spoke Wrench |
$5.00
| Compact Crank Puller Tool |
$9.95
| This is for a Crank Puller. It can be used on both ISIS and Square Taper. |
| Headset Cup Removal Tool |
$25.00
| Fits standard and oversize headsets |
| This item only ships to the USA and Canada |
| $85.00 |
| This headset press is compatible with steel or aluminum frames, 1” or 1-1/8” and assures alignment every time. 17" long. Stepped cup design fits any headset cup size. Includes nylon carrying bag |
| Headset Press |
| This item only ships to the USA and Canada |
| This is for a crank tool. This will remove both ISIS and square taper. this will work on most all systems. |
| Universal Crank Extractor Tool |
$10.00
| $30.00 |
| This is for a Cable Cutter. This is slightly different from the photo. This has a little cup with pin to clean up cable housing after it's been cut |
| Cable Cutter |
| Cable (Fourth Hand) Holder Tool |
12.00USD
| this pulls on the brake or derailleur cable while you tighten the anchor bolt. Has locking mechanism. |
| This is for 3 Zefal tire levers. Super-tough polymer construction. |
| Zefal Tire Levers |
$4.50
| $15.00 |
| This tool serves as a 2-part puller to remove the crank arms from the bottom bracket spindle. length 6 1/2 in. width 1 in. Fits cranks with 22m threads. |
| Park Crank Puller Tool |
| This item only ships to the USA and Canada |
| $20.00 |
| This cleans your chain by adding any standard cleaning fluid. Easy to use. |
| Bicycle Chain Cleaner |
| This item only ships to the USA and Canada |
| $22.00 |
| This removes the crown race from the front fork without causing damage or mangling the race. |
| Crown Race Removal Tool |
| This item only ships to the USA and Canada |
| All orders ship for 5.00USD via Air Mail (Tracking # is extra cost) |
| Paypal, Google, Credit Cards and Personal Checks Accepted |
| $6.50 |
| Compact crank arm puller. For use with all cranks. |
| Mini Crank Puller Tool |
$2.50
| Spoke Tool Wrench Black For use with DT Swiss/Wheelsmith 0.127" spoke nipples |
| Spoke Tool Wrench Green For use with Euorpean 14g - 15g 0.130" spoke nipples |
| Spoke Tool Wrench Red For use with Asian 14g - 15g 0.136" spoke nipples |
| 3 Spoke Tool Wrenches |
$6.25
| Add Tracking to your Order: Canada = 8.00 USA = 12.00 International = 40.00 |
|
| We ship Worldwide. |
| Google Payments also accepted |
| All Prices Are USD |
| $22.00 |
| $19.00 |
| Stainless steel. Two scales: .001 inch on top and .02 millimeter on bottom. Packaged in hard plastic case. |
| 6" Vernier Caliper with Plastic Box |
| $4.00 |
| Stainless steel high speed taps. Ground Threads. Use lubricant. |
| Metric Hand Taps |
| M4 x 0.7 Pitch |
| $3.80 |
| M3 x 0.5 Pitch |
| $4.20 |
| M5 x 0.8 Pitch |
| $4.30 |
| M6 x 1.0 Pitch |
| $4.30 |
| M8 x 1.25 Pitch |
| M10 x 1.25 Pitch |
| $4.50 |
| Made of tempered steel. With 60-degree thread profiles and locking devices. Range: 0.25-6 mm Leaves: 24 |
| Screw Pitch Gage |
| $4.50 |
| Carbon steel Use lubricant. |
| Metric Dies |
| $4.25 |
| M4 x 0.7 Pitch |
| $4.50 |
| M5 x 0.8 Pitch |
| $4.80 |
| M6 x 1.0 Pitch |
| $5.00 |
| M8 x 1.25 Pitch |
| $19.00 |
| Stainless steel. Two scales: .001 inch on top and .02 millimeter on bottom. Packaged in wood case. |
| 6" Vernier Caliper with Wood Box |
| $5.80 |
| M10 x 1.5 Pitch |
| $5.80 |
| M10 x 1.25 Pitch |
| M10 x 1.5 Pitch |
| $4.50 |
| $4.30 |
| M7 x 1.0 Pitch |