| Wellgo MG-1 Magnesium Platform Pedals |
| A pair of Wellgo platform pedals. These have a magnesium body, steel shaft with sealed bearings, adjustable spikes, double sided. 382g set. 9/16" threads for MTB. |
| Full Carbon Fiber Body. Gold Titanium axles Sealed bearings. Fiberglass tensioner. (80-150kg/cm) Size = 92x81mm 268g for the pair (Just pedal weight) |
| Karbona Pedal System |
| Pedal System |
| Please Note: The top photo is stock, the lower photo is the picture taken here and includes all items. |
| $200.00 |
| Superlight Ti6Al4V Titanium Alloy, Aerospace Material Weight: 27g/each Please note: one spindle has left hand threads so please check that your spindles don't have 2 right hand (Standard) threads 200lb weight limit. Compatible with following pedals: Wellgo WR1 c006 m111 r119 m079 Exustar pc96 epc96G, SARS, Tioga |
| Titanium Pedal Spindles For Wellgo/Exustar/Tioga |
| Pedal Spindles |
| $35.00 |
| Wellgo MG-18 Magnesium Clipless Pedals |
$50.00
| This is for a pair of Wellgo clipless pedals. These have a magnesium body, steel shaft with sealed bearings. 9/16" threads 340g for the pair. |
| Black MG-1 |
$55.00
| White MG-1 |
| Red MG-1 |
| Silver MG-1 |
| This is for a new pair of Aluminum crank bolts. These are used on most crank setups with M8 threads. (Square taper road cranks). Note: These should really not be used to install cranks, get full torque with steel bolts first. 9 grams for the set. |
| M8 Aluminum Crank Bolts |
$9.00
| Silver (Raw Aluminum) |
| Anodized Blue |
| Anodized Gold |
| Anodized Black |
| Anodized Orange |
| Anodized Red |
| Anodized Purple |
| Anodized Pink |
| $5.00 Shipping |
| Made of 6/4 Titanium CNC machined and Polished surface Approximate Weight: 71g/Pair, save 66g than stock steel spindles. Fits most Egg Beater pedals including: SL, Ti, 2 Ti& 4 Ti. Does not fit MXR 200lb weight limit. |
| Titanium Pedal Spindles For Crank Brothers : Egg Beater |
| Pedal Spindles |
| $48.00 |
| Now includes titanium axle nuts |
| Made of Ti-6Q2 Titanium CNC machined and Polished surface. Standard Length Spindles Total Length = 98.5mm Uses m5 right hand thread nuts. Length to bottom of nut threads = 81mm Weighs 64g for the pair. Made by Ward Industries |
| Titanium Pedal Spindle Crank Brothers : Mallet 1,2,3 |
| Pedal Spindles: Mallet 1,2,3 |
| $57.00 |
| Made of Ti-6Q2 Titanium CNC machined and Polished surface. Standard Length Spindles Total Length = 98.1mm Length to bottom of nut threads = 81mm Uses m5 right hand thread nuts. Weighs 66g for the pair. Made by Ward Industries |
| Titanium Pedal Spindle Crank Brothers : Mallet M |
| Pedal Spindles: Mallet M |
| $59.00 |
| Spindles by Ward Industries Made in the USA Ward spindles are not made from Ti-6al-4v (Ti 6/4) they are made from Ti-6Q2 a higher strength second generation Cro-Moly titanium alloy developed especially for the F-22 Fighterjet. These have a weight limit of 220lbs. 6 month warranty on breakage. |
$16.00
| Made of 6/4 Titanium CNC machined, Polished surface Weight: 8g/Pair Fit with all Crank brothers Egg Beater pedals |
| Crank Brothers - Egg Beater Titanium End Caps |
| Made of Ti-6Q2 Titanium CNC machined and Polished surface. Standard Length Spindles Total Length = 88mm Length to bottom of nut threads = 71mm Uses m5 right hand thread nuts. Weighs 62g for the pair. For 2010 and older Egg Beater pedals. Made by Ward Industries |
| Titanium Pedal Spindle - 2010 Egg Beater : Super Short |
| Pedal Spindles: Egg Beater |
| $70.00 |
| Made of Ti-6Q2 Titanium CNC machined and Polished surface. Standard Length Spindles Total Length = 96mm Length to bottom of nut threads = 78mm Uses m5 right hand thread nuts. Weighs 68g for the pair. For 2010 and older Egg Beater pedals. Made by Ward Industries |
| Titanium Pedal Spindle - 2010 Egg Beater : Standard Length |
| Pedal Spindles: Egg Beater |
| $68.00 |
| Made of Ti-6Q2 Titanium CNC machined and Polished surface. Standard Length Spindles Total Length = 92mm Length to bottom of nut threads = 74mm Uses m5 right hand thread nuts. Weighs 60g for the pair. For 2010 and older Egg Beater pedals. Made by Ward Industries |
| Titanium Pedal Spindle 2011 Egg Beater : Short Length |
| Pedal Spindles: Egg Beater |
| $68.00 |
| Made of Ti-6Q2 Titanium CNC machined and Polished surface. Standard Length Spindles Total Length = 95.5mm Length to bottom of nut threads = 78mm Uses m5 right hand thread nuts. Weighs 64g for the pair. For 2010 and older Egg Beater pedals. Made by Ward Industries |
| Titanium Pedal Spindle 2011 Egg Beater : Standard Length |
| Pedal Spindles: Egg Beater |
| $68.00 |
| Made of Ti-6Q2 Titanium CNC machined and Polished surface. Standard Length Spindles Total Length = 92mm Length to bottom of nut threads = 74mm Uses m5 right hand thread nuts. Weighs 59g for the pair. Made by Ward Industries |
| Titanium Pedal Spindle Crank Brothers : Candy 2011 - Short |
| Pedal Spindles: Candy 2011 |
| $60.00 |
| Made of Ti-6Q2 Titanium CNC machined and Polished surface. Standard Length Spindles Total Length = 95mm Length to bottom of nut threads = 78mm Uses m5 right hand thread nuts. Weighs 64g for the pair. Made by Ward Industries |
| Titanium Pedal Spindle Crank Brothers : Candy 2011 - Standard |
| Pedal Spindles: Candy 2011 |
| $62.00 |
| Made of Ti-6Q2 Titanium CNC machined and Polished surface. Standard Length Spindles Total Length = 98mm Length to bottom of nut threads = 81mm Uses m5 right hand thread nuts. Weighs 66g for the pair. Made by Ward Industries |
| Titanium Pedal Spindle Crank Brothers : Candy 2010 - XL |
| Pedal Spindles: Candy 2010 |
| $62.00 |
| This is for titanium set screws. These replace the little bolts on platform pedals. These work on most pedals. m4x8mm / 2mm hex |
| Titanium Platform Pedal / Socket Set Screws |
| This is for titanium set screws. These replace the little bolts on platform pedals. These work on most pedals. m4x8mm / 2mm hex |
| Titanium Platform Pedal / Socket Set Screws |
| Titanium Platform Pedal / Socket Set Screws |
| Titanium Bolt and Washer Look - Keo Cleats |
| $5.00 |
| Titanium washer and bolt for use with Look Keo pedal cleats. Will also fit other cleats that use washers and bolts that look like this. M5 bolt |
3 grams
Titanium
Spindles
Available
Spindles
Available
| Titanium Socket Set Screw |
$1.00
| 10 Titanium Socket Set Screws |
$9.50
| This is for titanium set screws. These replace the little bolts on platform pedals. These work on most pedals. m4x8mm / 2mm hex |
| Superlight Ti6Al4V Titanium Alloy, Aerospace Material Total Length = 111mm Length to bottom of nut threads = 88.5mm Please note: one spindle has left hand threads. Includes titanium nuts and one is left hand threads. Weighs 98g for the pair. 200lb weight limit. For Xpedo Pedals. |
| Titanium Pedal Spindles : Xpedo Pedals |
| Pedal Spindles: Xpedo |
| $35.00 |
| Superlight Ti6Al4V Titanium Alloy, Aerospace Material Total Length = 90mm Length to bottom of nut threads = 64.5mm Please note: one spindle has left hand threads. Includes titanium nuts and both are right hand threads. Weighs 73g for the pair. 200lb weight limit. For Time Pedals. |
| Titanium Pedal Spindles : Time Pedals |
| Pedal Spindles: Time |
| $35.00 |
| Wellgo WPD 801 Sealed Bearing Pedals The Wellgo WPD 801 sealed bearing pedals are recommended for Mtb, or Road use. The Wellgo WPD 801 sealed bearing pedals feature an aluminum body, sealed bearings, cromoly axle for strength, and durability,and includes wellgo 98A cleats, and compatible with Shimano sh-51 cleats. Thread: 9/16" - Weight: 366g Cleats Included: WPD-98A 4 degrees float Sold In Pairs |
| Wellgo Clipless Mountain Bike Pedals - WPD-801 |
| WPD-801 Red |
| $50.00 |
| WPD-801 Silver |
| WPD-801 Black |
| _______________________________________________ |
| Titanium Pedal Spindles and Axles, Titanium Bolts and Cleats |
| All Titanium fasteners and bolts are Grade 5 / 6al-4v |
| Made of Ti-6Q2 Titanium CNC machined and Polished surface. Standard Length Spindles Total Length = 91.58mm Length to bottom of nut threads = 74mm Uses m5 right hand thread nuts. Weighs 63g for the pair. For 2010 and older Egg Beater pedals. Made by Ward Industries |
| Titanium Pedal Spindle - 2010 Egg Beater : Short |
| Pedal Spindles: Egg Beater |
| $69.00 |
| Titanium Pedal Spindles For Wellgo MG-1 Platform Pedals |
| $35.00 |
| Superlight Ti6Al4V Titanium Alloy, Aerospace Material for MG-1 pedals Weight: 82g/set Please note: one spindle has left hand threads. Includes titanium nuts and one is left hand threads. Uses a 8mm allen and 15mm wrench to tighten 200lb weight limit. |
| Pedal Spindles |
| Gold Spindles |
| Blue Spindles |
| Please note that a tracking number is extra cost and is very expensive overseas. Some orders take extra time so please be patient if a delay occurs. |
| Paypal, Credit Cards and Checks Accepted |
Orders ship for 5.00 via Air Mail
| We ship Worldwide. |
| All Prices are USD |
|
| Add Tracking to your Order: Canada = 8.00 USA = 12.00 International = 40.00 |
| 4 Titanium Bowtie Pedal Insert Bolts with Torx Socket |
$15.00
| This is 4 titanium bolts for pedal inserts. These use a T15 torx tool. M4x16.5 countersunk titanium bolts. |
| Titanium Cleat Fixing Bolt For use with: Shimano SPD |
$2.50
| This a titanium bolt for use with Shimano SPD systems. M5 threads, 2.5mm hex 7.7mm total length Please measure your bolt to make sure this is the proper size. |