| This is for one Aluminum Recessed Brake Nut. Used on carbon fiber forks. I do not know all forks these will fit, If you can please try to measure. Longer nuts can easily be filed down to fit. |
| Aluminum Recessed Brake Nut Sizes: 13mm, 18.5mm, 23mm, 28.5mm |
| The photo shows the 13.5mm version of this bolt |
| This is for a Mini alloy bolt kit. These bolts replace your little steel bolts on your derailleur and brakes. you get: 2 m4x16mm, 4 m3x10mm, 4 m3x15mm and 4 m3x20mm. m4 pitch=.7, m3 pitch=.5 This is a universal kit, you get more than you need for the average bike. |
| Aluminium Hardware |
| This is for a set of 5 anodized aluminum Chainring Bolts. These are used on all Double chain ring applications. |
| Alloy Chainring Nut/Bolt Set of 5 Doubles Colors: Red, Blue, Black, Green, Purple, silver and Gold |
| This is for a set of 5 anodized aluminum Chainring Bolts. These are used on all Single chain ring applications. |
| Alloy Chainring Nut/Bolt Set of 5 Singles |
$11.50
| 13mm Aluminum Recessed Brake Nut |
3.00 USD
| 18.5mm Aluminum Recessed Brake Nut |
3.25 USD
| 23mm Aluminum Recessed Brake Nut |
3.50 USD
| 28.5mm Aluminum Recessed Brake Nut |
3.75 USD
| Aluminum Brake Post Stud Pair |
| This is for a set of 5 anodized aluminum Chainring Bolts. These are used to fasten the inner gear on MTB setups. |
| Alloy Chainring Inner (Granny) Bolt Set of 5 |
| Aluminum Hollow Rear Derailleur Pivot Bolt Kit - Shimano - 8.5 grams |
| Will fit all Shimano. Includes all in photo |
| Note: The pinch bolt is raw titanium color |
| Aluminum Caliper Pad Fixing Bolt Pair |
1.7 grams
| This replaces the bolt that holds the pads in place. Includes Titanium Clips |
| Formula ORO (M4x27mm) |
$6.50 - Aluminum Version
| Anodized Blue |
| Raw Aluminum |
| $17.00 |
| Anodized Gold |
| Anodized Green |
| Anodized Red |
| $.95 |
| This is for an aluminium alloy spacer. OD=13mm ID= 6.2mm 5mm height |
| Single Spacer |
| 5mm Black Alloy Spacer (For 6mm bolts) |
| 5.50 USD |
| 1 gram per nut. These bolt uses a 5mm Allen 7075-t6 aluminium. These are the bolts for mounting the small (Inner) gear on MTB cranksets |
| A2Z Alloy Inner (Granny Gear) Chainring Bolt Set of 4 |
| Gold |
| Blue |
| A2Z Alloy Inner (Granny Gear) Chainring Bolt Set of 5 |
| Gold |
| Blue |
| 6.50 USD |
| $5.00 |
| These are used in place of brake post studs. Works with Hydraulic or Mechanical lines Keeps dirt and debris out of bosses CNC Machined - 6061-T6 Heat Treated Aluminum |
| Brake Boss Plugs M10 (1.25 Pitch) |
| 13.5mm Aluminum Recessed Brake Nut |
3.00 USD
| 17mm Aluminum Recessed Brake Nut |
3.25 USD
| This is for an aluminium alloy derailleur adjustment bolt. This has m5 threads and will fit all Shimano related systems. These are for use with derailleur cable only. 1.6 grams each m5 threads - 0.8 pitch |
| Anodized Silver |
| $4.50 |
| Anodized Blue |
| Anodized Gold |
| Aluminium Alloy Derailleur Adjustment Bolt |
| Anodized Green |
| Anodized Red |
| Anodized Black |
| This is for a new pair of Aluminum crank bolts. These are used on most crank setups with M8 threads. (Square taper road cranks). Note: These should really not be used to install cranks, get full torque with steel bolts first. 9 grams for the set. |
| M8 Aluminum Crank Bolts |
$9.00
| Silver (Raw Aluminum) |
| Anodized Blue |
| Anodized Gold |
| Anodized Black |
| 2 grams per nut/bolt. The bolt uses a 5mm Allen, The nut uses a 6mm Allen wench. 7075-t6 aluminium. These fit most MTB applications and are used where 2 chainrings are bolted together to the spider. 4 nuts and bolts |
| A2Z Alloy MTB (Doubles) Chainring Bolt Set of 4 |
| A2Z Alloy MTB (Doubles) Chainring Bolt Set of 5 |
| Anodized Orange |
| Anodized Red |
| Anodized Purple |
| Anodized Pink |
| $12.00 |
| This is for a set of 5 chainring bolts. These are for Double chainrings . The nut uses an allen key. 2 grams each. No logs on this product |
| TorontoCycles Chainring Bolts Doubles set of 5 - Hex Nut |
| Blue |
| $10.50 |
| Gold |
| Orange |
| $12.50 |
| Blue |
| Gold |
| Orange |
| Derailleur/Brake Spring/Stop Mini Alloy 14 Bolts Colors: Blue, Purple and Silver |
| Anodized Black |
| Anodized Purple |
| Anodized Orange |
| Anodized Pink |
| Anodized Red |
| Anodized Black |
| Anodized Orange |
| Anodized Pink |
| On most aluminum items I can make in the colors listed below: Pink, Yellow gold, Orange gold, Purple, Blue, Red, Green, Black If you want an item and don't see the color listed please contact me and I will advise if I can produce and additional time needed. |
| M10 x 1.25 / Red / Bolts Only |
| M10 x 1.25 / Blue / Bolts Only |
| M10 x 1.25 / Gold / Bolts Only |
| All orders ship for 5.00USD via Air Mail (Tracking # is extra cost) |
| Paypal, Google, Credit Cards and Personal Checks Accepted |
| 31.5mm Aluminum Recessed Brake Nut |
3.75 USD
| 35mm Aluminum Recessed Brake Nut |
3.85 USD
| M10 x 1.25 / Orange / Bolts Only |
| M10 x 1.25 / Green / Bolts Only |
| M10 x 1.25 / Pink / Bolts Only |
| M10 x 1.25 / Silver / Bolts Only |
| Anodized Pink |
| Anodized Purple |
| I am updating this page and will be moving the standard bolts, washers and nuts to here |
| Aluminum Derailleur Jockey Wheel Bolt Pair |
| These fit all Shimano and any derailleur using countersunk bolts. M5 Bolt. 1.6 grams for the pair |
| Anodized Blue |
| Raw Aluminum |
| Anodized Gold |
| Anodized Green |
| $3.80 |
| Aluminum Hollow Rear Derailleur Pivot Bolt: Shimano - 3.5grams |
| Made for Dura-Ace but will fit all Shimano: XT, XTR. Uses a 5mm allen wrench. 3.5 grams |
| Anodized Blue |
| Raw Aluminum |
| $8.00 |
| Anodized Gold |
| Anodized Green |
| Anodized Red |
| Anodized Black |
| Anodized Purple |
| Anodized Orange |
| Anodized Pink |
| Cadence Works Lightweight Aluminum Rear Derailleur Pivot Bolt |
$7.00
| Made from T6 7075 aluminum Mounts the rear derailleur to the droupout Fits all Shimano and equivalent manufacturer's rear derailleur These do not fit the new axle-mounted rear derailleurs 4 grams |
$6.00
| Blue Mini Kit |
| Purple Mini Kit |
| SIlver (Raw) Mini Kit |
| 5 Pink Doubles |
| 5 Blue Doubles |
| Cadence Works 7075 T6 Aluminum Top Cap bolt |
$3.00
| Blue Top Cap Bolt |
| This lightweight bolt is used to tighten up your headset when adjusting or installing a stem These aluminum bolts are made from T6 7075 aluminum and are extremely lightweight Each bolt weighs only 3.6 grams, stock weighs 10.7. |
| Gold Top Cap Bolt |
| Gold Top Cap Bolt |
| Black Top Cap Bolt |
| Blue Top Cap Bolt |
| SRP Lightweight Aluminum M8 Crank Bolts Only 10 grams |
$12.50
| SRP Bolt Pair Blue |
| SRP Aluminum Crank Bolt Pair. M8 Bolt, For use with square taper bb's. Uses a 14mm socket. 10 grams per pair. |
| SRP Bolt Pair Green |
| SRP Bolt Pair Silver |
| SRP Bolt Pair Gold |
| Cadence Works Speedplay Type Aluminum Pedal Inserts |
$45.00
| Bowtie inserts to replace the stock steel ones Made out of T6 7075 Aluminum Anodized to increase strength and durability Weight = 11.5 grams for all four inserts!!! Includes all four (4) pedal inserts needed to replace standard steel bowties Reduce the rotating mass and make pedaling easier by saving over 22.5 grams compared to stock inserts |
| SRP Aluminum Crank Arm Dustcaps |
$8.00
| SRP Dust Caps Blue |
| SRP Aluminum Crank arm dust caps. For use with all standard cranks. Uses a 6mm socket. 5 grams per pair. |
| SRP Dust Caps Green |
| SRP Dust Caps Gold |
| SRP Dust Caps Silver |
| $12.00 |
| Aluminum cassette lock ring. Fits all Shimano type hubs. 8.5 grams Please lubricate threads prior to installation, The anodize process slightly enlarges the threads. |
| SRP Aluminum Cassette Lock Ring / Shimano |
| SRP Lightweight Aluminum Top Cap - 1 1/8" Only 9.5 grams |
$8.50
| SRP Top Cap Blue |
| SRP Aluminum Top Cap. For use with all 1 1/8" forks. 9.5 grams each. |
| SRP Top Cap Gold |
| SRP Top Cap Silver |
| SRP Lightweight Aluminum Top Cap - 1" Only 9 grams |
$8.50
| SRP Top Cap Red |
| SRP Aluminum Top Cap. For use with all 1" forks. 9.5 grams each. |
| This is for a new pair of aluminium crank bolt collars. These are used on most crank setups |
| Aluminum Alloy Self Extracting Collars |
$6.00
| Red Collars |
| Blue Collars |
| Green Collars |
| Black Collars |
| Gold Collars |
| Silver Collars |
| Purple Collars |
| $10.00 |
| Aluminum cassette lock ring. Fits all Shimano type hubs. 12 tooth tool, 8.5 grams Please lubricate threads prior to installation, The anodize process slightly enlarges the threads. |
| Aluminum Cassette Lock Ring / Shimano |
| Red Lockring |
| Purple Lockring |
| Gold Lockring |
| Orange Lockring |
| Green Lockring |
| Black Lockring |
| Blue Lockring |
| Silver Lockring |
| Pink Lockring |
| Aluminum Brake Lever Adjustment Bolt (M10) |
| This is for a replacement Aluminum brake cable adjuster for many cnc type brake levers. Paul and vintage systems use this type bolt. Uses M10 Threads, 1.0 pitch. 11.5 grams. |
| $7.50 |
| Red Adjuster |
| Blue Adjuster |
| Black Adjuster |
| Gold Adjuster |
| Silver Adjuster |
| Green Adjuster |
| Purple Adjuster |
| Pink Adjuster |
| Blue Pedal Inserts |
| Shimano Systems |
| 5 Red Doubles |
| This is for an aluminium alloy derailleur adjustment bolt. This has m5 threads and will fit all Campy related systems. These are for use with derailleur cable only. 1.6 grams each m5 threads - 0.5 pitch Very fine threads. |
| Anodized Silver |
| $4.50 |
| Anodized Blue |
| Anodized Gold |
| Aluminium Alloy Derailleur Adjustment Bolt |
| Anodized Green |
| Anodized Red |
| Anodized Black |
| Anodized Pink |
| Anodized Purple |
| Campagnolo Systems |
| XTR : M4 Threads - 27mm to Clip |
| XTR Titanium |
| XTR Aluminum Red |
| XTR Aluminum Gold |
$8.50 - Titanium Version
| This is for a replacement Aluminum cable adjuster for most precision billet and many cnc type brake levers. Uses M7 Threads. 4.5 Grams |
| M7 Precision Billet Aluminum Cable Adjuster |
| Silver Adjuster |
| Red Adjuster |
| Gold Adjuster |
| Blue Adjuster |
| Black Adjuster |
| $6.50 |
| Purple Adjuster |
| Speedplay Type Titanium Bolt Set of 4 |
| Countersunk bolt set of 4 for mounting Speedplay type pedal inserts. 4 Countersunk M4 bolts. |
$12.00
| SRP Aluminum Rear Derailleur Pivot Bolt |
| Aluminum Rear Derailleur to Frame Pivot Bolt fits all shimano derailleurs besides the shadow. |
| Gold Pivot Bolt |
| $8.00 |
| Red Pivot Bolt |
| Purple Pivot Bolt |
| Green Pivot Bolt |
| Blue Pivot Bolt |
| Silver Pivot Bolt |
| SRP Aluminum Rear Derailleur Jockey Wheel Bolt Pair |
| These fit all Shimano and any derailleur using countersunk bolts. M5 Bolt. 1.6 grams for the pair |
| Gold Bolt Pair |
| $5.00 |
| Red Bolt Pair |
| Blue Bolt Pair |
| Silver Bolt Pair |
| Green Bolt Pair |
| Black Bolt Pair |
| Black Pivot Bolt |
| Alloy Chainring Nut/Bolt Set of 5 Singles |
$11.50
| 5 Red Singles Nuts and Bolts |
| 5 Blue Singles Nuts and Bolts |
| 5 Gold Singles Nuts and Bolts |
| 5 Green Singles Nuts and Bolts |
| 5 Black Singles Nuts and Bolts |
| 5 Silver Singles Nuts and Bolts |
| 5 Pink Singles Nuts and Bolts |
| SRP 11t Red Lockring |
| SRP Bolt Pair Purple |
| SRP Dust Caps Black |
| Double Style Chainring Bolt Kit. Fits most MTB bike cranks with 5 bolt chainrings. This kit includes both 5 chainring bolts and 5 chainring nuts 7mm closed height |
| SRP Chain Ring Nut-Bolt Set Of 5 (Doubles) For (MTB) Triple Chain Ring Applications |
| Gold SRP Doubles |
$16.00
| Black SRP Doubles |
| Blue SRP Doubles |
| Silver SRP Doubles |
| Purple SRP Doubles |
| SRP Top Cap Black |
| SRP 12t Gold Lockring |
| SRP Top Cap Red |
| SRP Bolt Pair Black |
| SRP Dust Caps Red |
| SRP Top Cap Purple |
| Red SRP Doubles |
| XTR Aluminum Black |
| Anodized Purple |
| SRP Aluminum Rear Hub Cog Spacer |
| These fit all Shimano hubs 8 Speed : 3mm Thick, ID=35mm OD=42mm |
| 8 Speed Blue |
| $1.50 |
| Single Style Chainring Bolt Kit. Fits most Road bike cranks with 5 bolt chainrings. This kit includes both 5 chainring bolts and 5 chainring nuts 4mm closed height |
| SRP Chain Ring Nut-Bolt Set Of 5 (Singles) For (Road) Chain Ring Applications |
| Red SRP Singles |
$16.00
| Blue SRP Singles |
| Black SRP Singles |
| Gold SRP Singles |
| SRP Aluminum Alloy Self Extracting Collars |
$8.00
| Black Collars |
| Silver Collars |
| M8 x 1.25 Pitch |
| $8.00 |
| M10 x 1.0Pitch |
| M10 x 1.25Pitch |
| M10 x 1.5Pitch |
$6.00
| Red |
| Purple |
| Silver |
| Black |
| Green |
| Gold |
| This is for a set of 4 anodized aluminum Chainring Bolts. These are used to fasten the inner gear on MTB setups. |
| Alloy Chainring Inner (Granny) Bolt Set of 4 |
$5.00
| Red |
| Purple |
| Silver |
| Black |
| Green |
| Gold |
| We ship Worldwide. |
| Google Payments also accepted |
| All Prices Are USD |
|
| Add Tracking to your Order: Canada = 8.00 USA = 12.00 International = 40.00 |
| XTR Grey |
| XTR Grey |
| XTR Grey |
| $10.00 |
| Extra Long (14mm) Aluminum Granny Bolts |
| Red Granny Bolt |
| This is for extra long Aluminum Granny bolts. These replace the long bolts found on some crank systems (If the bolt uses a spacer underneath the gear). Hollow Bolts 14mm total length, 14mm from the bottom of the head. |
| The price is for a single bolt. You can update quantity in the shopping cart. |
$1.50
| Gold Granny Bolt |
| Silver Granny Bolt |
| Blue Granny Bolt |
| Black Granny Bolt |
| Pink Granny Bolt |
| 5 Black Doubles |
| 5 Gold Doubles |
| 4 Aluminum V-Brake Cup Washers |
| This replaces the 4 cup washers found on most v-brake systems |
$5.00- Aluminum Version
| Titanium Cup Washers |
$6.50 - Titanium Version
| Red Aluminum Washers |
| Silver Aluminum Washers |
| Pink Adjuster |
| M8 x 1.25 / Black / Bolts Only |
| $5.00 |
| These are used in place of brake post studs. Works with Hydraulic or Mechanical lines Keeps dirt and debris out of bosses CNC Machined - 6061-T6 Heat Treated Aluminum |
| Brake Boss Plugs M10 (1.0 Pitch) |
| M10 x 1.0 / Black |
| M10 x 1.0 / Red / Bolts Only |
| M10 x 1.0 / Blue / Bolts Only |
| M10 x 1.0 / Gold / Bolts Only |
| M10 x 1.0 / Orange / Bolts Only |